Web: Viewing Port Status And Configuring Port Parameters - HP Procurve 2650 Management And Configuration Manual

Optimizing Traffic Flow with Port Controls, Port Trunking, and Port-Based Priority
Configuring a Broadcast Limit on the Switch. Executing this command
configures the broadcast limit for all ports on the switch.
Syntax: broadcast-limit < 0 . . 99 >
For example, to configure a broadcast limit of 20% for all ports on the switch:
To display the current broadcast limit setting, use one of the following com-
mands:
Web: Viewing Port Status and Configuring Port
Parameters
In the web browser interface:
1. Click on the Configuration tab.
2. Click on
3. Select the ports you want to modify and click on
4. After you make the desired changes, click on
Note that the web browser interface displays an existing port trunk group.
However, to configure a port trunk group, you must use the CLI or the menu
interface. For more on this topic, see "Port Trunking" on page 9-10.
Viewing Port Status and Configuring Port Parameters
Displays the startup-config file. The
broadcast limit setting appears here
if configured and saved to the
startup-config file.
Displays the running-config file.
.
.
.
9-9