System Parameters; Table 4-2: System Parameters - AudioCodes MediaPack MP-124 User Manual

4.4.2

System Parameters

ini File Parameter
EnableDiagnostics
WatchDogStatus
LifeLineType
GWAppDelayTime
ActivityListToLog
SIP User's Manual

Table 4-2: System Parameters

Checks the correct functionality of the different hardware components on
the device. On completion of the check, if the test fails, the device sends
information on the test results of each hardware component to the Syslog
server.
[0] = Rapid and Enhanced self-test mode (default).
[1] = Detailed self-test mode (full test of DSPs, PCM, Switch, LAN,
PHY and Flash).
[2] = A quicker version of the Detailed self-test mode (full test of
DSPs, PCM, Switch, LAN, PHY, but partial test of Flash).
For detailed information, refer to the Product Reference Manual.
[0] = Disable device's watch dog.
[1] = Enable device's watch dog (default).
Defines the Lifeline phone type. The Lifeline phone is available on port 1
of MP-11x FXS devices and on ports 1 - 4 of the MP-118 FXS/FXO
devices.
The Lifeline is activated upon one of the following options:
[0] = Power down (default).
[1] = Power down or when link is down (physical disconnect).
[2] = Power down or when link is down or on network failure (logical
link disconnect).
Notes:
To enable Lifeline switching on network failure, LAN watch dog must
be activated (EnableLANWatchDog = 1).
This parameter is only applicable to FXS interface.
For a description of this parameter, refer to ''Advanced Parameters'' on
page 127.
The Activity Log mechanism enables the device to send log messages
(to a Syslog server) that report certain types of Web actions according to
a pre-defined filter.
The following filters are available:
[PVC] (Parameters Value Change) = Changes made on-the-fly to
parameters.
[AFL] (Auxiliary Files Loading) = Loading of auxiliary files (e.g., via
'Certificate' screen).
[DR] (Device Reset) = Reset of device via the 'Maintenance Actions'
screen.
[FB] (Flash Memory Burning) = Burning of files / parameters to flash
(in 'Maintenance Actions' screen).
[SWU] (Device Software Update) = cmp loading via the Software
Upgrade Wizard.
[ARD] (Access to Restricted Domains) = Access to Restricted
Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
240
Description
Document #: LTRT-65410
MediaPack Series