Sor-Screen Orientation - Christie Boxer 30 Technical Reference

Command
SNM+STAL <0 | 1>
SNM+TIP1 "<IP address>"
SNM+TIP2 "<IP address>"
SNM+TIP3 "<IP address>"
SNM+THRM <0 | 1>
Examples
Set the SNMP read community name to public:
(SNM+READ "public")
Configure one of the client IPs to receive traps:
(SNM+TIP1 "192.168.1.25")
Disable power state traps:
(SNM+POWR 0)
SOR–Screen Orientation
Selects the orientation of the displayed image.
Commands
Command Description
SOR <value> Changes the orientation of the displayed
image. This command is only available if
video electronics are on. (Saved value)
Examples
Turn on rear projection:
(SOR 1)
Turn on front projection inverted:
(SOR 2)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Enables or disables fan/cooling
faults. (Saved value)
Sets up to three IP addresses for
traps to be sent. (Saved value)
Enables or disables temperature
faults. (Saved value)
Serial API commands
Values
0 = Disables fan/cooling faults
1 = Enables fan/cooling faults (Default)
IP address = String value
0.0.0.0 disables notifications (Default)
0 = Disables temperature faults
1 = Enables temperature faults (Default)
Values
0 = Front projection (Default)
1 = Rear projection
2 = Front projection inverted
3 = Rear projection inverted
55