Adjusting The Image; Selecting Screen Image Orientation; Setting The Image Resize Preset; Adjusting Offset - Christie Boxer 4K30 User Manual

Adjusting the image

This section provides information and procedures for adjusting the projector image. Christie
recommends warming the lens before completing these procedures as focus may change as the lens
warms.

Selecting screen image orientation

The projector supports front projection, rear projection, front projection inverted, and rear
projection inverted.
1. Select MENU > Image Settings > Image Orientation.
2. Select the required orientation from the list.
3. To confirm your selection, press Enter.

Setting the image resize preset

Setting the image resize preset determines if an image will display in its native resolution or will
resize by maximizing the height, width, both height and width, or to the maximum size while
keeping the original aspect ratio.
1. Select MENU > Image Settings > Size and Position > Resize Presets.
2. Select the appropriate resize preset:
• Auto—Maximize for current source.
• No Resizing—Display in native resolution.
• Full Size—Fill the screen, regardless of source.
• Full Width—Fill display width and keep aspect ratio.
• Full Height—Fill display height and keep aspect ratio.
3. Select Enter.

Adjusting offset

Adjust the offset to align the image on the screen. Always adjust offset before adjusting boresight.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
17