Locking The Lens Motor; Resetting The Lens To Home Position; Selecting Screen Image Orientation - Christie D13WU2-HS User Manual

2. Select Menu > Configuration > Lens Settings > Lens Memory > Apply Position.
3. To apply specific lens setting, select the required record.
4. To confirm the selection, press ENTER.

Locking the lens motor

Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out
any changes and overriding all other lens features. This feature prevents accidental lens position
changes in multiple projectors installations.
1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.
2. To enable locking of all lens motors, select Locked.
3. To unlock all lens motors, select Allow.
4. To confirm the selection, press ENTER.

Resetting the lens to home position

Set the lens offset back to the home position.
1. Select Menu > Configuration > Lens Settings > Lens Calibration.
You can also press LENS on keypad or LENS H/LENS V on remote control.
2. Press ENTER.
3. To start the lens calibration, select OK.

Selecting screen image orientation

Specify the orientation to use for the image. The projector supports front projection, rear
projection, front projection inverted, or rear projection inverted.
1. To invert the projection image, select Menu > Configuration > Ceiling Mount.
2. Select appropriate ceiling mount settings:
• Auto—Detect the orientation automatically.
• Off—Disable the ceiling mount setting.
• On—Enable the ceiling mount setting.
3. To confirm the image orientation, press ENTER.
4. To do a rear projection, select Menu > Configuration > Rear Projection.
5. To swap, press ENTER.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
Configuring system settings
47