Sor-Screen Orientation; Sps-Splash Screen - Christie 4K35-RGB Technical Reference

Examples
Set the SNMP read community name to public:
(SNM+READ "public")
Configure one of the client IPs to receive traps:
(SNM+TIP1 "192.168.1.25")
Disable power state traps:
(SNM+POWR 0)
SOR–Screen Orientation
Selects the orientation of the displayed image.
Commands
Command Description
SOR <value> Changes the orientation of the displayed
image. This command is only available if
video electronics are on. (Saved value)
Examples
Turn on rear projection:
(SOR 1)
Turn on front projection inverted:
(SOR 2)
SPS–Splash Screen
Changes the characteristics of the displayed splash screen when no signal is present.
Commands
Command Description
SPS+COLR <value> Changes the background color of the splash screen. This command
is only available when video electronics are on. (Saved value)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
0 = Front projection (Default)
1 = Rear projection
2 = Front projection inverted
3 = Rear projection inverted
Values
1 = Red
2 = Green
3 = Blue
7 = Black (Default)
54