Sor-Screen Orientation; Sps-Splash Screen - Christie Boxer 4K Technical Reference

Command Description
SIN+PORT <config> Select an input port configuration to use. This command
is only available if video electronics are on. (Saved
value)
Examples
Use four DDICs to display a Four-Port Quadrant image:
(SIN+PORT 4)
Result:
($SIN 3)
Try to select an unavailable input because there is only one TDPIC in the projector:
(SIN+PORT 4)
Result:
($SIN 1)
SOR–Screen Orientation
Selects the orientation of the displayed image.
Commands
Command Description
SOR <value> Changes the orientation of the displayed
image. This command is only available if
video electronics are on. (Saved value)
SPS–Splash Screen
Changes the characteristics of the displayed splash screen when no signal is present.
Commands
Command Description
SPS+COLR <value> Changes the background color of the splash
screen. This command is only available
when video electronics are on. (Saved
value)
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
1 = One-Port (Default)
2 = Two-Port
3 = Four-Port Columns
4 = Four-Port Quadrants
Values
0 = Front projection (Default)
1 = Rear projection
2 = Front projection inverted
3 = Rear projection inverted
Values
1 = Red
2 = Green
3 = Blue
7 = Black (Default)
45