M Digital Transceiver Communication - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu (continued)

M Digital Transceiver Communication

Set the calling details.
"NXDN Trunking"
q RX All Call .....................
Callee Designation
w Call Type .....................
"NXDN Trunking"
e Destination Prefix ID ......
r Destination ID ...............
"NXDN Conventional"
t Digital SQL ..................
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
"NXDN Conventional"
Select "Enable" to permit all talkgroups to receive the call.
Select the type of call.
• Individual : Call only specified radio.
• Group : Call all radios that belong to the specified group.
• All : Call all radios.
Enter the destination prefix ID.
Setting range: (Depending on the system mode)
Enter the destination ID.
Setting range: (Depending on the system mode)
Select "Enable" to use the Digital Squelch function.
• If "Enable" is selected, the squelch opens when the matched RAN and
Individual ID or Talkgroup ID are received.
6-72
(Default: Disable)
(Default: Individual)
(Default: 1)
(Default: 1)
(Default: Disable)