M Voice Transmission Control To A Bridge Connection - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu (continued)

M Voice Transmission Control to a Bridge Connection

The VOX (voice operated transmission) function automatically switches the connected transceiver to transmit,
when the VE-PG3 receives the audio signal through the network.
q Attack Time ..................
w Release Time ...............
e Voice Delay ..................
r Voice Threshold ............
Select the TX attack time in 0 to 2000 millisecond step. It is the delay time
before the VOX switch turns ON after an audio signal is received through the
network.
Range: 0 to 2000 milliseconds
Select the RX delay time in 5 millisecond step. The time is the delay for the
VOX switch to turn OFF after no audio signal is received through the network.
Range: 5 to 2000 milliseconds
Set the audio signal buffer time to prevent intermittent audio in 5 millisecond
step.
Range: 0 to 500 milliseconds
Set the voice threshold level. The VOX function automatically switches
between receive and transmit according to this threshold level.
Range: 0 to 100 %
• Lower values make the VOX function more sensitive to the audio signal.
6-105
[Port Settings]–[Bridge 1–Bridge 4]
(Default: 50)
(Default: 500)
(Default: 200)
(Default: 40)