Connection - Icom VE-PG3 Instruction Manual

3
CONVERTER MODE APPLICATION
7. Connecting to the Bridge mode's VE-PG3 (continued)

2. Connection

Set the transceiver channel, volume level, TX output power, and other necessary settings, before connecting to the
VE-PG3.
NOTE:
• Verify that both the radio and the VE-PG3 are turned OFF when connecting or disconnecting the transceiver.
1
Connect the VE-PG3 and the transceiver, using the OPC-2775 cable.
To [TRX1] (Upper slot)
A A B C
• The [TRX1] and [TRX2] ports (upper slots) accept the OPC-2275 connectors.
However, follow the example to correctly connect the transceiver to ONLY the [TRX1] slot.
2
When all the connections are complete, turn ON the transceiver and VE-PG3's power.
VE-PG3 (Rear view)
LINE2 LINE1
PHONE
Be sure to insert the
A B C
connectors top side up.
OPC-2275
Icom's transceiver
(IC-F5060/IC-F6060 series)
To the external speaker jack
A
1 2 3 4
Top Bottom
3-33
(Rear view)
(Front view)
To the microphone connector