M Static Dhcp; M Static Dhcp Table - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
4. [Network] Menu
M DHCP Server (continued)
u Default Gateway ............
i DNS Proxy ..................
o Primary WINS Server ......
!0 Secondary WINS Server ...
!1 TFTP ...........................
!2 TFTP Server ..................

M Static DHCP

Enter MAC and static IP addresses to the DHCP server.
• You can enter up to 32 entries.

M Static DHCP Table

Displays the static DHCP entries.
Enter the IP address of the connecting device, if the network part of the IP
address is different from that of set in [IP Pool Start Address](w).
Select "Enable" for the DNS substitute function.
When "Enable" is selected, you don't need to change the setting even when
the DNS server address has changed.
Enter the WINS server's primary address.
Enter the WINS server's secondary address.
Select "Enable" to use TFTP server, which is used for provisioning.
If you use "KX-UT series" IP phone with the separated SIP server, select
"Enable."
Enter the TFTP server address.
If the address is not specified, the VE-PG3's IP address is notified.
If you use the separated SIP server, enter the server's address.
6-13
[Network]–[DHCP Server]
(Default: Enable)
(Default: Disable)