M Ext Control Terminal - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)

M EXT Control Terminal

Set the control signal output details for the [EX1T]/[EXT2] port.
• This setting item appears when "Relay Circuit" is selected in [Control Circuit Change].
*Appears only when "RTP synchronization" is selected on [Control Output at the Start of Audio Output].
q Control Output at the Start of Audio Output
w Release Time ...............
e Voice Delay ..................
Control Circuit Change:Relay Circuit
Select the control signal output option.
• Disable : Does not send the control signal.
• RTP synchronization
: Sends the control signal when RTP is received.
• Regardless of the audio signal presence, the relay is
activated while the RTP is received.
Select the RX delay time in 5 milliseconds step.
Range: 5 to 2000 milliseconds
It is the delay time for the VOX switch to turn OFF after not audio signal is
received through the network.
Set the audio signal buffer time to prevent intermittent audio in 5 milliseconds
step.
Range: 0 to 500 milliseconds
5-96
[Port Settings]–[EXT Output 1 (EXT1)/EXT Output 2 (EXT2)]
(Default: RTP synchronization)
(Default: 100)
(Default: 5)