Icom VE-PG3 Instruction Manual page 142

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu
M Digital Transceiver Connection (continued)
RAN
q RX RAN ........................
w TX RAN ........................
e Appointment ..................
r Encryption .....................
Status
t Connection Status .........
Mode: NXDN Conventional
Enter the RAN code for receiving.
Enter the RAN code for transmitting.
Enter the check mark when you separately set the TX RAN.
Select "Enable" to encrypt the communication.
• When you select "Enable," enter the appropriate key to [ Encryption Key].
Displays the communication status.
<Connection>
Click to connect to the UC-FR5000.
• "Connecting" appears when connected to the UC-FR5000.
<Refresh>
Click to refresh the status.
5-80
[Port Settings]–[Digital Transceiver 1 (D-TRX1)]–
[Digital Transceiver 4 (D-TRX4)]
(Default: 1)
(Default: 1)
(Default: Disable)