M Voice Transmission Control To The Transceiver; M Voice Transmission Control From The Transceiver - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu (continued)

M Voice Transmission Control to the Transceiver

The VOX (voice operated transmission) function automatically switches the connected transceiver to transmit,
when the VE-PG3 receives the audio signal through the network.
*Appears only when "VOX" is selected in [Audio Transmission Methods to the Transceiver].
q Attack Time ..................
w Release Time ...............
e Voice Delay ..................
r Voice Threshold ............

M Voice Transmission Control from the Transceiver

Attack Time .....................
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Enter the attack time in 5 milliseconds step.
Range: 5 to 500 milliseconds
It is the delay time before the VOX switch turns ON after an audio signal is
received through the network.
Select the amount of time before returning to receive in 5 milliseconds step.
Range: 5 to 2000 milliseconds
It is the delay time for the VOX switch to turn OFF after no audio signal is
received through the network.
Select the amount of time to store the audio from the network in 5
milliseconds step.
Range: 0 to 500 milliseconds
The VE-PG3 stores the audio from the network for the specified time of peri-
od to prevent the beginnings of phrases are clipped.
Set the voice threshold level.
Range: 0 to 100 %
The VOX function automatically switches between receive and transmit
according to this threshold level.
Lower values make the VOX function more sensitive to the audio signal.
Select the attack time.
Range: 0, 200, 400, 600, 800 and 1000 milliseconds
6-66
(Default: 50)
(Default: 500)
(Default: 200)
(Default: 40)
(Default: 1000)