Icom VE-PG3 Instruction Manual page 133

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu
M Transceiver Control (continued)
r Pull-up Control ...............
t TX Volume ..................
y RX Volume ..................
u Transceiver's Beep Invalidity Time
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Select "Enable" to pull up the Single Squelch input terminal.
Adjust the VE-PG3's transmitting audio level that is sent to the connected
transceiver between "+6" and "–12" (dB).
Adjust the VE-PG3's audio output level of the audio signal that is received
from the connected transceiver between "+6" to "–12" (dB).
Enter the time period to mute the audio (including beep signal) from the
connected radio.
Range: "0" to "1000" (in 5 milliseconds step)
5-71
(Default: Disable)
(Default: 0)
(Default: 0)
(Default: 400)