Trx/Ext Transceiver 1 (Trx1)-Transceiver 3 (Trx3) - Icom VE-PG2 Instruction Manual

3
VE-PG2 SETTING SCREEN
■ Connection setting (Bridge mode)
3-7 TRX/EXT Transceiver 1 (TRX1)–Transceiver 3 (TRX3)
(Continued)
ï VOX control setting (Continued)
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then �Connection setting,�� and then on �TRX/EXT,�� and then Connection setting,�� and then on �TRX/EXT,�� and then ,�� and then on �TRX/EXT,�� and then �� and then on �TRX/EXT,�� and then and then
click on one of the Transceiver ports, TRX1, TRX on one of the Transceiver ports, TRX1, TRX2 or TRX3 shown on the list.
q
w
e
r
t
y
u
i
r V����� ��h����h�l�
Set the threshold to switch to transmit when AF signal are received from the [LAN]
port.
(Default: 40)
(Selectable range: 0 to 100 (%))
VOX f�� IP ����u���������
Set the VOX setting for the VE-PG2 to send audio to the [LAN] port, when the
transceivers that are connected to the [TRX1]–[TRX3] ports receive signals with
audio.
t A������k ������
Set the delay time for the VOX switch to turn ON after AF signals are received from
the [TRX1]–[TRX3] ports.
(Default: 50)
(Selectable range: 5 to 2000 (milliseconds), 5 milliseconds steps)
76