M Special Number - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
8. [Extension Connect] Menu (continued)

M Special Number

Set the special numbers.
q Call Pickup ..................
w Directed Call Pickup ......
e Group Pickup ...............
r OFF-hook Sending .........
t OFF-hook Replying .........
y ON-hook .....................
u Immediate Calling .........
i Special System Number ...
Enter the extension number to substitutively respond the call to other
extension.
Enter the number to substitutively respond the call to other extension
specified by the input number + the extension number.
Enter the callee destination number to substitutively receive the call which is
designated to other port belongs to the same group.
• Numbers (0–9) and symbols (#, *) up to 3 digits.
Select the tone signal when starting to dial.
Hold down this key for a while, then push the number keys to call.
Select the tone signal to receive the call.
• When no tone signal is specified, the call is automatically received when
you are called.
Select the tone signal to end (disconnect) the call.
• Pushing this key disconnects the communication route.
Set the DTMF code for immediately transmitting the code.
Enter the special system number.
6-45
[Extension Connect]–[Special Number]
(Default: *82, *90, *91, *93, *92, *83, *89)
(Default: *81)
(Default: *80)
(Default: **)
(Default: None)
(Default: #)
(Default: #)
(Default: None)