M Announce Tone (Ext Output) - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu (continued)

M Announce Tone (EXT Output)

Configure the details for sound effect of audio device connected to the [EXT1]/[EXT2] port.
q Start Tone .....................
w End Tone .....................
e Announce Tone Volume ...
Select the tone which sounds before the announcement starts.
Select the tone which sounds after the announcement.
Select the volume level for the announce tones.
6-94
[Port Settings]–[EXT Output 1 (EXT1)/
EXT Output 2 (EXT2)]
(Default: Single Tone1)
(Default: Not Used)
(Default: 0)