Icom VE-PG3 Instruction Manual page 259

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu
M EXT Voice Terminal (continued)
w Valid Timing ..................
e Power for the Microphone
[EXT2] port
[Port Settings]–[EXT Input 1 (EXT1)/EXT Input 2 (EXT2)]
Select the condition to send the audio signal.
• Always-on Connection
Always sends the audio signal to the destination selected in [Input
Connection Port].
• When "IP Network" or "Emergency" is selected in [Input Connection Port],
this option cannot be selected.
• Voice Data Detection
When an audio signal is input, sends the audio signal to the destination
selected in [Input Connection Port].
• Control Data Detection
When the control signal is input, sends the audio signal to the destination
selected in [Input Connection Port].
Select "Enable" to supply the voltage to the microphone connected to A3/A4
terminal (Audio input) microphone.
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4 A1~A4 A1~A4
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4 A1~A4 A1~A4
VE-PG3 (Rear view)
• See Section 8 for port details.
6-80
(Default: Control Data Detection)
B1~B4 B1~B4 C1~C4 C1~C4
B1~B4 B1~B4 C1~C4 C1~C4
(Default: Disable)
[EXT1] port