Icom VE-PG3 Instruction Manual page 313

7
MAINTENANCE
7. About the Automatic Restore function (continued)
About the settings file name
The settings file must be saved as "savedata.sav" in the USB flash drive.
The firmware file, which is downloaded from Icom website, must be saved as "firmware.dat" in the USB flash drive.
• Only the settings file saved on the VE-PG3's setting screen can be used. See page 7-4 for details.
About the firmware file name
The firmware file must be saved as "firmware.dat" in the USB flash drive.
• You need to rename the file after downloading the firmware from Icom web site.
About the Automatic Settings Backup function
The latest 10 backup files (revisions) are stored in the USB flash drive, as the file name "bakdata_X.sav"
(X=Revision number).
(Example)
The oldest backup file's name; "bakdata_10.sav"
• The firmware is not automatically saved as a backup.
• The latest settings backup file is saved as "bakdata.sav" (with no revision number).
• If the content of settings file is the same as the VE-PG3's current settings, no setting backup file is saved.
7-10