M Dhcp Server - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
4. [Network] Menu (continued)

M DHCP Server

Configure the DHCP Server function.
q DHCP Server ...............
w IP Pool Start Address ......
e Pool Size .....................
r Subnet Mask ..................
t Lease Time ..................
y Domain Name ...............
Select "Enable" to use the DHCP Server function.
Enter the IP pool start address.
Enter the size of IP pool.
Note: Up to 128 addresses can be automatically assigned by the DHCP serv-
er function. Another 32 addresses can be manually assigned.
Enter the subnet mask for the IP pool start address set in the [IP Pool Start
Address] item (w).
Enter the lease time period.
Range: 1–9999 (hours)
Enter the network address domain name. (Up to 127 characters)
5-13
[Network]–[DHCP Server]
(Default: Disable)
(Default: 192.168.0.10)
(Default: 30)
(Default: 255.255.255.0)
(Default: 72)