Mdtmf Call Setting - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu
M Transceiver Control (continued)
*
*
*Appears only when "DTMF" is selected in [PTT Control Type from the Telephone].
!3 PTT-ON Tone ...............
!4 PTT-OFF Tone ...............
DTMF Call Setting
M
Use DTMF Call ..................
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Select the DTMF tone to start the transmission.
• The transmission is started when the selected tone signal is detected.
• If the selected DTMF tone is same as that of selected in [PTT-OFF], the
transmission and reception toggles every time the tone is detected.
Select the DTMF tone to return to the reception.
• The transmission is stopped when the selected tone signal is detected.
• If the selected DTMF tone is same as that of selected in [PTT-ON], the
transmission and reception toggles every time the tone is detected.
Select "Enable" to use DTMF signaling.
6-65
(Default: 0)
(Default: 0)
(Default: Disable)