Panel Description; M Front Panel - Icom VE-PG3 Instruction Manual

1
BEFORE USING THE VE-PG3

Panel description

M Front panel

Front view
<UPDATE> button ............
LED
PWR/MSG
WAN
V/RoIP
*: Setting the [Abnormal Condition Monitoring] item on the [Expansion] screen is necessary for this indication, and the
LAN port linkdown monitoring takes priority. See page 5-102 and 5-103 for the details.
[PWR/MSG] LED
[V/RolP] LED
<UPDATE> button [WAN] LED
Indication
Doesn't light
Green Lights
Blinks
Red Lights
Blinks
Orange Lights
Blinks
Doesn't light
Green Lights
Blinks
Red Lights
Blinks
Orange Lights
Blinks
Doesn't light
Green
Lights
Blinks
Red Lights
Blinks
Orange Lights
Blinks
[TRX] (1/2) LED [USB] port
(USB2.0)
[D-TRX] LED [EXT] (1/2) LED
When [PWR/MSG] lights orange, a firmware update is ready.
• To use the Firmware Update function, an internet connection,
DNS and default gateway settings are necessary.
In the Converter mode
A firmware update is ready./Downloading new firmware.
Accessing the USB flash drive.
(While loading the setting file or updating the firmware.)
Initialization is in progress. (Green and Orange LEDs alternately light.)
Firmware update is in progress.
No network connection./Connecting to the network is in progress.
Connected to the WAN line. (An IP address has been obtained.)
The WAN line is communicating.
Authentication error/failed (PPPoE)
Failed to obtain IP address (DHCP) (Time-out timer: 30 seconds)
LAN port linkdown*
No PING reply from the specified host.*
No registration
Registration succeed (All entries)
The line is communicating.
1 or more registrations failed.
1-2
In the Bridge mode
Power is OFF
Power is ON
Booting
–
–
Booting
–
Not connected
Connected
–
–
–
–
–