Icom VE-PG3 Instruction Manual page 116

5
BRIDGE MODE SETTING SCREEN
7. [Bridge Connection] Menu
M Bridge Connection Point (continued)
r Connection Port Number Enter the destination's VE-PG3 port number.
(Enter the same port number as in the [My Station Port Number](t) item.)
• Setting range: Even numbers between 2 and 65534
(Some numbers may not be acceptable.)
• The set port number (RTP) and the port number +1 (RTCP) are used for the
communication.
• When using in the Unicast mode, do not set the port number which has
already been used by another connection setting.
• The default number differs, depending on the setting as shown below.
(Default: 21504(Digital Transceiver 1(D-TRX1)),
21506(Digital Transceiver 2(D-TRX2)),
21508(Digital Transceiver 3(D-TRX3)),
21510(Digital Transceiver 4(D-TRX4)),
21520(Emergency),
When [IP Communication Mode] is set to [Unicast]:
21500(Transceiver 1(TRX1)),
21502(Transceiver 2(TRX2)),
21512(External Input1 (EXT1), External I/O 1(EXT1)),
21514(External Output1 (EXT1)),
21516(External Input2 (EXT2), External I/O 2(EXT2)),
21518(External Output2 (EXT2)),
When [IP Communication Mode] is set to [Multicast]:
22510(Transceiver 1(TRX1), Transceiver 2(TRX2), External Input1
(EXT1), External Output1 (EXT1), External I/O 1(EXT1), External
Input2 (EXT2), External Output2 (EXT2), External I/O 2(EXT2))
5-54
[Bridge Connection]–[Bridge Connection]