Icom VE-PG3 Instruction Manual page 250

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu
M Digital Transceiver Connection (continued)
"NXDN Trunking"
Encryption
!0 Encryption .....................
Status
!1 Connection Status .........
"NXDN Conventional"
!2 TCP Port Number .........
"NXDN Conventional"
!3 UDP Port Number .........
"NXDN Conventional"
!4 Packet Encryption .........
RAN
"NXDN Conventional"
!5 RX RAN ........................
"NXDN Conventional"
!6 TX RAN ........................
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
"NXDN Conventional"
Select "Enable" to encrypt the communication.
• When you select "Enable," enter the appropriate key to [ Encryption Key].
Displays the communication status.
<Connection>
Click to connect to the UC-FR5000.
• "Connecting" appears when connected to the UC-FR5000.
<Reload>
Click to refresh the status.
Enter the TCP port number which is set in the UC-FR5000 (Connection Port).
Enter the UDP port number which is set in the UC-FR5000 (Data Port).
Select "Enable" to encrypt the data packet.
• When you select "Enable," enter the appropriate key to [Key].
Enter the RAN (Radio Access Number) for receiving.
When a different RAN is assigned for transmitting, enter the RAN for transmitting.
• Enter the check mark to [Appointment], and then enter the RAN for transmitting.
6-71
(Default: Disable)
(Default: 41200)
(Default: 41220)
(Default: Disable)
(Default: 1)
(Default: 1)