Icom VE-PG3 Instruction Manual page 86

5
BRIDGE MODE SETTING SCREEN
5. [Router] Menu (continued)
M Connection Settings
Configure the WAN connection. (Up to 8 destinations can be registered.)
q Select Connection .........
w Nickname .....................
e Username .....................
r Password .....................
t Reconnect Mode ............
y IP Address .....................
PPPoE
Select the WAN connection. (Up to 8 destinations can be registered.)
Enter an ISP name of up to 31 characters
Enter a login user name or account name.
Enter a login password.
• The entered characters are displayed as an * (asterisk) or a • (dot).
Select the PPPoE connection method.
• Manual
The PPPoE line can be manually connected or disconnected, by clicking
<Connect> or <Disconnect>.
• The network is disconnected, when the VE-PG3 is booted.
• Always-on
The PPPoE line is always connected.
• You can manually connect or disconnect by clicking Connect or
Disconnect in the Connection Status item.
Enter the WAN IP address, if specified by your ISP.
5-24
[Router]–[WAN]
(Default: WAN01)
(Default: Always-on)