Icom VE-PG3 Instruction Manual page 137

5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)
M Digital Transceiver Connection
Set the details to connect to the UC-FR5000 Network Controller..
q Repeater Address .........
w Repeater Port Number ...
e Local Port Number .........
r Connect Key ..................
t Area Bit ........................
y Integrator Code ............
u System Code ...............
i Prefix ID ........................
oUnit ID ........................
!0 T alkgroup ID ..................
Mode: NXDN Trunking
Enter the UC-FR5000's IP address.
Enter the Connection Receive Port number which is set in the UC-FR5000.
Enter the Data Receive Port number which is set in the UC-FR5000.
Enter the Key Code which is set in the UC-FR5000.
Turn the Area Bit ON or OFF.
Enter the Integrator Code which is set in the UC-FR5000.
Enter the System Code which is set in the UC-FR5000.
Enter the Prefix ID which is set in the UC-FR5000.
Enter the Unit ID which is set in the UC-FR5000.
Enter the Talkgroup ID which is set in the UC-FR5000.
5-75
[Port Settings]–[Digital Transceiver 1 (D-TRX1)]–
[Digital Transceiver 4 (D-TRX4)]
(Default: OFF)
(Default: 1)
(Default: 1)
(Default: 1)
(Default: 1)
(Default: 1)