Icom VE-PG3 Instruction Manual page 102

5
BRIDGE MODE SETTING SCREEN
5. [Router] Menu
M IP Filter (continued)
i Source Port .................. Select the source port, or enter the TCP/UDP source port number.
There are two ways to specify the port number.
• Specifying by number
1. Select Common.
2. Set the common port number to Start - End.
When you use a specific port, enter only the start point, or enter the same
number to both start and end points.
Port number range: 1 to 65535 (in decimal)
• Specifying by mnemonic
Select a source port other than Any or Common.
DNS, Finger, FTP, Gopher, NEWS, POP3,SMTP, Telnet, Web and Whois are
selectable.
• When Any is selected, all types of the port number types are filtered.
5-40
[Router]–[IP Filter]