M Digital Transceiver Control - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu (continued)

M Digital Transceiver Control

Configure the details for digital transceiver control.
q PTT Cancel: ..................
Notice Tone to the Transceiver
w Reception Notice ............
e Calling Notice Tone .........
r Send Connect Success Tone
t Disconnect Notice Tone ...
[Port Settings]–[Digital Transceiver1 (D-TRX1)–Digital Transceiver4 (D-TRX4)]
Select "Enable" to abort the calling to an IP phone when a transmit request is
detected.
Select "Tone 1" to "Tone 3" to notify that the call from an IP phone is received.
Select "Tone 1" to "Tone 3" to notify the calling to an IP phone.
Select "Tone 1" to "Tone 3" to notify that the IP phone's handset is picked up.
Select "Tone 1" to "Tone 3" to notify that the IP phone's handset is put.
6-73
(Default: Disable)
(Default: None)
(Default: Notice Tone 2)
(Default: Notice Tone 2)
(Default: Notice Tone 3)