M Dynamic Dns Updates - Icom VE-PG3 Instruction Manual

5
BRIDGE MODE SETTING SCREEN
5. [Router] Menu (continued)

M Dynamic DNS Updates

Displays the update status of the dynamic DNS servers.
q Time ...........................
w Status ...........................
e Host Address ...............
r IP Address .....................
t Refresh ........................
y Update the Server .........
Displays the time when the VE-PG3 notified the dynamic DNS server of the
VE-PG3's global IP address.
Displays the update status.
Note: If an error message appears, check the setting following the message.
• When any of the message shown below appears, check the dynamic DNS
settings.
• [Failed to access the dynamic DNS server]
• [Failed to log in the dynamic DNS server]
• [An error returned from the dynamic DNS server]
• [Authentication error]
• [Script error], and so on.
Displays the host name that is registered to the dynamic DNS server.
Displays the global IP address that is registered to the dynamic DNS server.
Click to refresh the screen.
Click to send the VE-PG3's WAN IP address to the dynamic DNS server.
5-33
[Router]–[Dynamic DNS]