Configuration - Icom VE-PG3 Instruction Manual

3
CONVERTER MODE APPLICATION
5. Emergency Notice (continued)

1. Configuration

Access the VE-PG3 setting screen, and set the items as shown below.
VE-PG3 (Area A)
Menu Item Setting Screen
Operating Mode Operating Mode
V/RoIP IP Line
Extension Extension Connect
Connect
Incoming Call
Port Settings Transceiver 1 (TRX1) Transceiver Model:
EXT Input 1 (EXT1) EXT Control Terminal
EXT Output 1 (EXT1) EXT Control Terminal
EXT Input 2 (EXT2) EXT Control Terminal
Expansion Priority Control
Emergency Notice
Setting Item Item Name
Operating Mode Operating Mode
EXT I/O Port Mode EXT I/O Port Mode
SIP Server IP Phone Number
SIP Server Address
SIP Service Domain
User ID
Password
List of SIP Server Entries Connection Status
Extension Extension Number
(TRX1) Port Type
(EXT1) Extension Number
Port Type
V/RoIP Incoming Call Setting Receive Port
Transceiver Model
Input Connection Port
Valid Timing
Reference Level
Input Analog Gain
Input Digital Gain
Reference Level
Output Analog Gain
Output Digital Gain
Fade-out
Fade-in
Announce Tone Start Tone
End Tone
Announce Tone Volume
V/RoIP Control Send Connect Success
Tone to Telephone
Notice Tone Volume
Release Timer No Voice Release Timer
Input Connection Port
Valid Timing
EXT Control Terminal Input Type
Event ON Time
Event OFF Time
Control Input Detection
Control Input Pull-up Setting
Priority Level Individual Calling
Emergency Notice Transceiver 1 (TRX1)
EXT I/O 1 (EXT1)
3-22
Value
Converter
Separate
32 (Extension Number set in the VE-PG3 in area B)
192.168.0.3 (IP address set in the VE-PG3 in area B)
192.168.0.3 (Extension Domain set in the VE-PG3 in area B)
32 (Extension Number set in the VE-PG3 in area B)
(Password set in the VE-PG3 in area B)
Connection successful
301
Transceiver 1 (TRX1)
302
EXT I/O 1 (EXT1)
32:302 (EXT1)
IC-F5060/F6060 (default)
Ext Output
Always-on Connection
(Depending on the external device.)
(Select a desired setting.)
(Select a desired setting.)
(Select a desired setting.)
(Select a desired setting.)
5 (seconds) (Select a desired setting.)
Emargency
Control Data Detection
(Select a desired setting.)
(Depending on the external device.)
Priority
Enable
Enable
(Continued on the next page.)