Icom VE-PG3 Instruction Manual page 103

5
BRIDGE MODE SETTING SCREEN
5. [Router] Menu
M IP Filter (continued)
o Destination Port ............ Select the destination port, or enter the TCP/UDP destination port number.
There are two ways to specify the port number.
• Specifying by number
1. Select Custom.
2. Set the Custom port number to Start - End.
When you use a specific port, enter only the start point, or enter the same
number to both the start and end points.
Port number range: 1 to 65535 (in decimal)
• Specifying by mnemonic
Select a source port other than Any or Custom.
Selectable mnemonics are DNS, Finger, FTP, Gopher, NEWS, POP3,SMTP,
Telnet, Web and Whois are selectable.
• When Any is selected, all of the port number types are filtered.
5-41
[Router]–[IP Filter]