Icom VE-PG3 Instruction Manual page 243

6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu
M Transceiver Control (continued)
*
*
*Appears only when "DTMF" is selected in [PTT Control Type from the Telephone].
!0 Send Connect Failure Tone
!1 Notice Tone Volume .........
PTT Control Type from the Telephone
!2 PTT Control Type ............
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Select "Tone 1" to "Tone 3" to notify that the calling IP phone is unavailable.
Select the tone level for above items.
Range: "+6" to "–12" (dB)
Select the input signal type to control the transceiver to transmit.
• VOX
: The transceiver transmits and communication route is
connected when an audio input is detected.
• DTMF
: The transceiver transmits and communication route is
connected when a DTMF tone signal is detected.
6-64
(Default: Notice Tone 3)
(Default: 0)
(Default: VOX)