Icom VE-PG3 Instruction Manual page 7

1
BEFORE USING THE VE-PG3
Panel description
M Front panel (continued)
D-TRX*
TRX1
TRX2
EXT1
EXT2
*For the operation using an IC-FR5000/FR6000.
• All indicators light while updating the firmware or rebooting.
• The indication may differ, depending on the setting.
Front view
[PWR/MSG] LED
[V/RolP] LED
<UPDATE> button [WAN] LED
Doesn't light
Green Lights
Blinks
Red Lights
Blinks
Orange Lights
Blinks
Doesn't light
Green Lights
Blinks
Red Lights
Blinks
Orange Lights
Blinks
Doesn't light
Green Lights
Blinks
Red Lights
Blinks
Orange Lights
Blinks
[TRX] (1/2) LED [USB] port
(USB2.0)
[D-TRX] LED [EXT] (1/2) LED
No transceiver is connected, or it is in the standby mode.
Receiving an audio signal.
Sending an audio signal.
The transceiver is communicating.
No transceiver is connected, or it is in the standby mode.
Receiving an audio signal.
Sending an audio signal.
The transceiver is communicating.
No input or output signal.
Input is busy.
Output is busy.
Input or output is busy.
1-3
–
–
–
–
–
–
–
–
–