M Extension - Icom VE-PG3 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
8. [Extension Connect] Menu (continued)

M Extension

Set the extension number and call destination number.
• The displayed items may differ, depending on the setting.
Transceiver EXT Input 1/2
Digital Transceiver
*
*
*Appears when "Enable" is selected in [DID Call].
SIP Phone
q Extension Number .........
w Port Type .....................
e Outgoing Line Priority ......
r Radio System Group ......
t Outgoing Line (IP Line) ...
y Outgoing Line (LINE) ......
Emergency Notice
[Enter the extension number (2 to 7 digits) of the device connected to the port
set in [Port Type] (w).
Select the type of port to connect the device. (Default: Transceiver 1 (TRX1))
• You cannot select the port which is already used.
Select the line priority for outgoing call.
Select the group to substitutionally receive the call to the group.
• If a digital port is busy, then the received call is automatically transferred to
a vacant port.
Select the IP line for outgoing call.
Select the PSTN line for outgoing call.
[Extension Connect]–[Extension Connect]
Phone
Bridge
6-35
(Default: IP LIne=> LINE)
(Default: None)
(Default: None)
(Default: None)
(Continued on the next page.)