Operation - Icom VE-PG3 Instruction Manual

3
CONVERTER MODE APPLICATION
2. Using an in-house sound system (continued)

3. Operation

When Radio A1 transmits, or the IP phone in area B (Extension No.: 401) dials 32, the call is output through the
external audio device.
Area A
Extension No.
Radio A
Radio A1
• All radios in the area must have the same settings.
[Making an announcement from Radio A1]
q Area A
Radio A1's operator: While holding down [PTT],
say something (example: "Test, Test, Test") into the
microphone at a normal voice level.
• The [TRX1] and [EXT1] ports are internally connected.
w Area A
The BGM fades out and the announcement made by
Radio A1's operator is output to the external AMP,
followed by the "Broadcast start sound."
e Area A
When the announcement is finished, or no audio
signal is detected for 5 seconds (default), the BGM
fades in, after the "Broadcast end sound."
Extension No.
302
Audio device
External AMP
(for BGM)
Audio output
(A1/A2 terminal) Audio input
(A3/A4 terminal)
[EXT1]
IP Phone No.
301
32
[TRX1]
VE-PG3
(192.168.0.2)
An example of an in-house audiosystem
Area B
IP
Network
VE-PG3
(192.168.0.3)
[Making an announcement from the IP phone]
q Area B
Person on the IP telephone: Take the handset off
the hook, dial "32."
w Area A
The call from the IP phone is received by the IP line
whose number is "32."
e Area A
The external audio device which is connected to
[EXT1] fades out the BGM, and the announce-
ment is output to the external AMP, followed by the
"Broadcast start sound".
e Area A/B
Person on the IP telephone: When putting the
handset on, or no audio signal is detected for 5 sec-
onds (default), the BGM fades in, after the "Broad-
cast end sound" and preset time period.
3-9
HUB
Extension No.
401
[LAN]
IP telephone
(KX-UT Series)