1-2.Radio Communication Function; Radio Communication Function; 1-3.Using In Building Communication Mode; Using In Building Communication Mode - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ3

1-2 Radio Communication Function

The three ways (two modes and one function) below are available as connection method
for SB-110 to build up the wireless network.
● Building Communication (Wireless Bridge) mode (see 1-3)
● Access Point mode (see 1-4)
● Roaming function (see 1-5)
SB-110 operates in the Building Communication mode by default or when all the settings
are initialized. Those two modes cannot be used simultaneously.

1-3 Using in Building Communication Mode

In this network system, by connecting those units facing to each other in the Wire-
less Bridge mode, those wired LAN can be connected in a wireless system.
* The maximum number of SB-110s used simultaneously is 256. However, it is
recommendable to use ten units or less.
Radio Transmission Area
A maximum of 256 units
BEFORE INSTALLATION
Wired LAN
1,024 units - The maximum number of the usable
1
Ethernet LAN
Ethernet LAN
Ethernet LAN
1
3