Using The Mixing Function; Configuration - Icom VE-PG3 Instruction Manual

2
BRIDGE MODE APPLICATION

3. Using the Mixing function

The mixing function mixes conversations from different Areas. As shown in the figure below, the Area A radio users
can talk to the Area B and relayed to the Area C.
• In this example, the audio signal of [TRX1] port and [TRX2] port (VE-PG3 in Area B) are mixed as illustrated
below.
Area A
VE-PG3
(192.168.0.2)
[LAN]
[TRX1]
Radio A
Radio A1

1. Configuration

Access the VE-PG3 setting screen, and set the items as shown below.
• Configure the VE-PG3 in Area A and C, referring to "Operation in the Unicast mode."
VE-PG3 (Area B)
Menu Item Setting Screen
Operating Mode Operating Mode
Port Settings Transceiver 1 (TRX1)
Transceiver 2 (TRX2)
Bridge Connection Bridge Connection Point Bridge Connection Point
*Enter the round marks to the "Group1" field in the Transceiver 1 (TRX1) and Transceiver 2 (TRX2) rows.
Area B
VE-PG3
(192.168.0.3)
Unicast
Mixing Mixing
[TRX1]
Radio B
Radio B1
An example of communication with the Mixing function
Setting Item
Operating Mode
IP Communication Mode
Mixing Group*
Transceiver Model:
Transceiver Model:
List of Bridge Connection
Point Entries
2-8
Unicast
IP
Network
[TRX2]
Radio D
Radio D1
Item Name
Operating Mode
IP Communication Mode Unicast
Transceiver Model
Transceiver Model
Connection IP Address
Connection Status
Area C
VE-PG3
(192.168.0.4)
[LAN]
[TRX2]
Radio C
Radio C1
Value
Bridge
Transceiver 1(TRX1),
Transceiver2(TRX2)
IC-F5060/F6060
IC-F5060/F6060
TRX1:192.168.0.2
TRX2:192.168.0.4
During Transmit