Configuration - Icom VE-PG3 Instruction Manual

Roip
Hide thumbs Also See for VE-PG3:
Table of Contents

Advertisement

3
CONVERTER MODE APPLICATION
4. Making an emergency announcement (continued)

1. Configuration

Access the VE-PG3 setting screen and set the items as shown below.
VE-PG3 (Area A)
Menu Item
Setting Screen
Operating Mode Operating Mode
V/RoIP
IP Line
Extension
Extension Connect Extension
Connect
Incoming Call
Port Settings
Transceiver 1 (TRX1) Transceiver Model:
EXT Input 1 (EXT1) EXT Control Terminal
EXT Output 1 (EXT1) EXT Control Terminal
Expansion
Emergency Notice
Setting Item
Item Name
Operating Mode
Operating Mode
EXT I/O Port Mode
EXT I/O Port Mode
SIP Server
IP Phone Number
SIP Server Address
SIP Service Domain
User ID
Password
List of SIP Server Entries
Connection Status
Extension Number
(TRX1)
Port Type
Default Call Destination No. 302 (From Radio 1 to EXT Output 1)
(EXT1)
Extension Number
Port Type
(Emergency Notice)
Extension Number
Port Type
V/RoIP Incoming Call Setting Receive Port
Transceiver Model
Input Connection Port
Valid Timing
Power for the Microphone
Reference Level
Input Analog Gain
Input Digital Gain
Reference Level
Output Analog Gain
Output Digital Gain
Fade-out
Fade-in
Announce Tone
Start Tone
End Tone
Tone Level
Send Connect Success
V/RoIP Control
Tone to Telephone
Notice Tone Volume
Release Timer
No Voice Release Timer
Emergency Notice
Transceiver 1 (TRX1)
EXT Output 1 (EXT1)
3-17
Value
Converter
Separate
99 (Extension Number set in the VE-PG3 in area B)
192.168.0.3 (IP address set in the VE-PG3 in area B)
192.168.0.3 (Extension Domain set in the VE-PG3 in area B)
99 (Extension Number set in the VE-PG3 in area B)
(Password set in the VE-PG3 in area B)
Connection successful
301
Transceiver 1 (TRX1)
302
EXT Output 1 (EXT1)
999
Emergency Notice
99:999 (Emergency call No.)
IC-F5060/F6060 (default)
Emergency
Control Data Detect
Enable
(Depending on the external device)
(Depending on the external device)
(Select a desired setting)
(Select a desired setting)
(Select a desired setting)
5 (seconds) (Select a desired setting)
Enable
Enable
(Continued on the next page.)

Advertisement

Table of Contents
loading

Table of Contents