Setting Up Your Zero Client - Dell Wyse 7030 User Manual

Setting Up Your Zero Client

Be sure you have read all safety guidelines before setting up and operating this product. Refer to the
figures and proceed as follows:
1. Place the zero client on a desk, make sure the monitor and the zero client are turned off and
disconnected from AC power.
2. Make all desired connections. The monitor, keyboard with mouse, and Ethernet network are
required. Additional connections of peripheral devices may be made to the other ports.
3. Connect the power adapter to the zero client power input before connecting to a 100-240V AC,
50-60 Hz electrical outlet. When AC power is applied, indicator light is amber.
4. Press zero client Power Button to apply power. The power button will light green; wait for the
monitor to display the On Screen Display (OSD).
Zero client LED indicators include:
• Off: AC power is off.
• Amber: AC power is on and zero client power is off.
• Green: Zero client power is on.
• Blinking green: Host server is in low-power state.
NOTE: If the monitor does not show the OSD, check all connectors and make sure the monitor
and zero client are turned on.
2
5