Firmware Upgrades - Dell 3250 Product Manual

Command
mount BlkDevice [sname[:]]
mv [src...] [dst]
pause
pci [bus_dev] [func]
rconnect DeviceHandle# [DriverHandle#
[ChildHandle#]] | [-r]
reset [reset_string]
rm file/dir [file/dir]
setsize file
stall microseconds
time [hh:mm:ss]
type [-a] [-u] [-b] file
ver
vol fs [volume_label]

Firmware Upgrades

Use the Firmware Update Utility to upgrade the firmware. This utility is an EFI application that
updates the following server management controllers:
•
Baseboard Management Controller (BMC)
•
Hot-swap Controller (HSC)
You can run the utility interactively by providing commands through the EFI shell, or you can run
it in non-interactive mode by supplying the command with any options. For information on the
command-line options, see Table 6.
NOTE
Review the firmware release notes that come with the software for additional
instructions before updating either the boot code or the operational code.
56
Description
Mounts a file system on a block device
Move one or more files/directories to destination
Prompts to quit or continue (scripts only)
Displays PCI device information
Reconnects one or more drivers from a device
Performs a cold reset
Removes files or directories
Sets size of a new file
Delays for the specified number of microseconds
Gets or sets the time
Displays the contents of a file
Displays version information
Sets or displays a volume label