2
Pull and then release the latch on the right side of the door. Do the same to release the latch on the other
side.
3
Remove the door.
Flatbed scanner assembly removal
1
Remove the ADF assembly. See
2
Remove the right cover. See
3
From the controller board, remove the screw (A), and then disconnect the following cables:
•
Control panel cable
•
Speaker cable
•
ADF cable
•
CIS cable
•
ADF scanner cable
4
Remove the scanner rear cover. See
"ADF assembly removal" on page
"Right cover removal" on page
"Scanner rear cover removal" on page
Parts removal
314
310.
237.
294.
7018