Microsd Card (Advanced); Loading The Saved Data Files - Icom IC-705 Advanced Manual

4�

microSD CARD (ADVANCED)

Loading the saved data files

You can load the Memory channels and
transceiver's settings from the microSD card to
the transceiver.
LThe transceiver has "ALL" and "Select" loading
options to choose from.
TIP: Saving the current data is recommended
before loading other data into the transceiver.
(Basic Manual)
1. Open the LOAD SETTING screen.
» SET > SD Card > Load Setting
2. Touch the file to load.
3. Touch "Select."
LIf you want to load all the contents on the LOAD
OPTION screen, touch "ALL" and go to step 6.
LIf you want to load only the repeater list, touch
"Repeater List Only" and go to step 6.
4. Touch the loading options.
(Example: CI-V Address)
• "✓" is displayed left side of the selected option.
LThe Set mode settings and Memory channel
contents are always loaded.
5. Touch "<<Load>>."
6. Touch [YES] or [NO].
LWhen you touch [YES], the skip settings of the
repeater list are retained.
LWhen you touch [NO], the skip settings of the
repeater list are cleared.
7. Touch [YES].
• After the loading ends, "COMPLETED! Restart
the IC-705." is displayed.
LWhen you select "REF Adjust" in step 4, "The
new "REF Adjust" setting will be saved" is
displayed.
8. Turn OFF the transceiver power, then turn it
ON again to restart the transceiver.
4-1