Alarms (Menu); Active Alarms - Radyne MM200 Installation And Operation Manual

User Interfaces
EVENT BUFF
PRESS CLR TO
ERASE EVENTS

4.4.8 ALARMS (Menu)

The primary Alarm Menus are listed below:
Screen Name
ACTIVE ALRMS (menu)
LATCHED ALRM (menu)
CLEAR ALARMS

4.4.8.1 Active Alarms

The Active Alarm Screens are listed below, including those related to the FPGA (Field
Programmable Gate Array):
Screen Name
MAJOR TX (menu)
MOD HW GLUE
MOD HW DATA
MDD0 HW FPGA
MDD1 HW FPGA
MDD2 HW FPGA
MDD3 HW FPGA
MDD0 PLLLOCK
4-24
{Empty, Number of events}
Displays the number of events that has
occurred and the event log. The event log
is the history of events recorded in the
event buffer. A maximum of 40 events
may be stored in the buffer. Upon receipt
st
of the 41 event, the first received event is
automatically deleted, and so on,
maintaining the maximum 40 events.
Removes all events from the buffer.
Selections and Descriptions
Current alarms.
Previous alarms that have been logged.
{Ent=Y, Clr=N}
Clears all latched alarms.
Selections and Descriptions
An alarm that will terminate transmissions.
Red LED will illuminate.
{Masked, Unmasked}
FPGA failure.
{Masked, Unmasked}
FPGA failure.
{Masked, Unmasked}
FPGA failure.
{Masked, Unmasked}
FPGA failure.
{Masked, Unmasked}
FPGA failure.
{Masked, Unmasked}
FPGA failure.
{Masked, Unmasked}
RF PLL not locked.
MM200 High-Speed Microwave Modem
RO
RW
L0
L0
RO
RO
RO
RO
RO
RO
RO
TM086 - Rev. 4.1
RO RO
RW RW
L1 L2
L1 L2
RO RO
RO RO
RO RO
RO RO
RO RO
RO RO
RO RO