Alarms Menu Options And Parameters - Radyne DMD20 Installation And Operation Manual

DMD20/20LBST Universal Satellite Modem

4.4.6 Alarms Menu Options and Parameters

Masking alarms may cause undesirable modem performance.
CAUTION
CURRENT ALARMS (menu)
TX MAJOR (menu)
FPGA CFG
DSP CFG
SCT CLOCK PLL
SYM CLOCK PLL
LB SYNTH PLL
IF SYNTH PLL
BUC CURRENT
BUC VOLTAGE
ETHERNET WAN
FORCED ALARM
MN-DMD20-20LBST Revision 14
Status Edit Table
{Pass/Fail, Unmasked/Masked}
Indicates a transmit FPGA configuration failure.
{Pass/Fail, Unmasked/Masked}
Indicates a transmit DSP configuration failure.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx SCT Clock PLL is not locked. This alarm
will flash on during certain modem parameter changes. A solid
indication points toward a configuration failure within the modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx Symbol Clock PLL is not locked. This alarm
will flash on during certain modem parameter changes. A solid
indication points toward a problem with the incoming clock to the
modem (SCTE).
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx L-Band Synthesizer is not locked. This
alarm will flash on during certain modem parameter changes. A
solid indication points toward a configuration problem within the
modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx IF Synthesizer is not locked. This alarm will
flash on during certain modem parameter changes. A solid
indication points toward a configuration problem within the
modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the BUC current has fallen outside of the threshold
limits.
{Pass/Fail, Unmasked/Masked}
Indicates that the BUC voltage has fallen outside of the threshold
limits.
{Pass/Fail, Unmasked/Masked}
Indicates that the interface card is faulted and will not pass data
(displays only when the Ethernet Card is installed and the
Ethernet Interface is selected).
{DISABLED, ENABLED}
Allows user to disable or enable forcing of a Tx Summary Alarm.
User Interfaces
4–28