Table of Contents
Advertisement
User Interfaces
Security User
Initial
Viewer
Oper–md5
Viewer–sha
Oper-sha
Note: All entries are case sensitive
4.19 Exiting SNMP Configuration
1.
Select the Main Menu by pressing '1' followed by <Enter>, to go back to the MM200 top-
level menu screen.
4.20 Logging On
1.
The user must be logged on to have access to SNMP Features. To log on the SNMP
configuration, press '13' followed by <Enter> to open the Logon Dialog Box.
+------------------| Logon |------------------+
|
|
1.User ID
|
2.Password
|
|
3.OK
|
+-----------------------------------------------+
2.
In the User ID Text Box, enter "Oper-md5" (case sensitive).
3.
In the Password Text Box, enter "Oper" (case sensitive).
4.
Select OK
4.21 Changing the Logon Password
To change the password, logged on so that the "SNMP/Security" selection appears. Once logged
on, proceed to the "SECURITY CONTROLS" Menu Selections by pressing '12'. Press '12' again
followed by <Enter> to open the Change Password dialog.
+---------| Change Password |-----------+
|
|
1.Old Password
|
2.New Password
|
3.Re-enter New Password :
|
|
4.OK
|
+-----------------------------------------------+
1.
In the Old Password Text Box, enter "Oper" (case sensitive).
4-44
Logon Password
Viewer
Oper
Viewer
Oper
|
:
|
:
|
|
4.CANCEL
|
|
|
:
|
:
|
|
|
5.CANCEL
|
|
MM200 High-Speed Microwave Modem
Authentication
Privacy Password
Password
Viewer
Oper
Viewer
Oper
Oper
Oper
TM086 - Rev. 4.1
Advertisement
Table of Contents
Troubleshooting
