Radyne MM200 Installation And Operation Manual page 140

Appendix A
<1> Channel Minor
Alarm Mask
Opcode: <0x2271>
<1> Selected
interface number
<4> Interface PID
<4> Interface Data
Rate
<1> Interface Control
<1> Interface Type
<1> Interface Sub
Type
<1>
Interface Framing
<1> Interface Volume
<1> Interface Clock
Polarity
A-40
Bit 2 - 7 = Spare
0 = Mask, 1 = Allow
Bit 0 = Loop lock status
Bit 1 = FEC lock status
Bit 2 = FIFO full status
Bit 3 = FIFO empty status
Bit 4 = FIFO active status
Bit 5 - 7 = Spare
Command selected Tx interface configuration
Command Data
0 = interface1
1 = interface2
2 = interface3
3 = interface4
0 - 8192
1000000 - 200000000
0 = Disable, 1 = Enable
0 = ASI
1 = AASI
2 = T3 DS3
3 = E3
4 = STS1
5 = T1 DS1
6 = E1
7 = DS0x8
8 = DS0x7+A
9 = Par DVB
10 = Par M2P
11 = OC3
12 = STM1
13 = HSSI
14 = SMPTE 19
15 = SMPTE 38
16 = P 10BaseT
17 = E2 UNBAL
18 = T2 UNBAL
19 = T2 BAL
20 = DS0 APC
Reserved, selects the Tx interface sub-type
0 = unframed
1 = MPEG 188
2 = MPEG 204
0 - 255
0 = normal, 1 = inverted, 2 = auto
MM200 High-Speed Microwave Modem
TM086 – Rev. 4.1