Radyne MM200 Installation And Operation Manual page 115

MM200 High-Speed Microwave Modem
<1> Minor Alarm1 Status
<1> Minor Alarm2 Status
<1> Common Alarm1
Status
<1> Common Alarm2
Status
<1> Latched Major
Alarm1 Status
<1> Latched Major
Alarm2 Status
<1> Latched Minor
Alarm1 Status
<1> Latched Minor
Alarm2 Status
<1> Latched Common
Alarm1 Status
<1> Latched Common
Alarm2 Status
<1> Carrier Status
<1> Spare
<4> Max Payload
<2> Utilization
<4>
Bandwidth
<4>
APC Minimum Tx
Level
Opcode: <0x2098>
TM086 – Rev. 4.1
0 = Pass, 1 = Fail
Bit 0 = Tx clock activity detect
Bit 1 = Tx data activity detect
Bit 2 = Frame Lock
Bits 3 – 7= Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Mask, 1 = Allow
Bit 0 = Glue Logic FPGA Fail
Bit 1 = Data FPGA Fail
Bits 2 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Glue Logic FPGA Fail
Bit 1 = Data FPGA Fail
Bits 2 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Tx clock activity detect
Bit 1 = Tx data activity detect
Bit 2 = Frame Lock
Bit 3 = Spare
Bits 4 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = off, 1 = on
Maximum payload at current modulation
% utilization, implied decimal point (i.e. 7985 means 79.85%)
Current bandwidth usage
Minimum APC transmit level (Not Yet Implemented)
Query the demodulator diversity status
Appendix A
A-15