Front Panel Control Screen Menus; Level 2 Menu Screens; Main Menu Screens - Radyne MM200 Installation And Operation Manual

Mm200 high speed microwave modem

Table of Contents

User Interfaces

4.2 Front Panel Control Screen Menus

The Front Panel Control Screen Menus are listed below. The MM200 Microwave Modem may be

operated in three different levels:

Level 0 - is for specialized factory configurations. Every screen is available including

those used for factory calibration and diagnostics.

Level 1 – includes those screens necessary for field maintenance.

Level 2 – is the default setting and is shipped from the factory in this mode. The screens

are available that provide the quickest form of setup and use.

Note: Screens Menus are listed below by level (L0, L1, and L2) and may be Read/Write

(RW) or Read Only (RO).

Level 2 menus screens allow for the quickest operation and system setup.

Main Menu Screens (one of which is a Title Screen) are listed below:

MM-200 MODULATOR

MODULATOR (menu):

DEMODULATOR (menu):

REPEATER (menu):

APC (menu):

TX INTERFACE (menu):

RX INTERFACE (menu):

MONITOR (menu):

ALARMS (menu):

SYSTEM (menu):

TEST (menu):

4-4

MM200 High-Speed Microwave Modem

Title Screen:

Not a modifiable screen.

TM086 - Rev. 4.1

Table of Contents