Table of Contents
Advertisement
MM200 High-Speed Microwave Modem
4.43 SNMP Test
1.
Once it is determined that the MM200 is reachable, compile the custom Management
Information Base (MIB) for use by the Network Management Station (NMS). The MIB
uses a hierarchical naming scheme. Each managed object in the MM200 is identified by
an Object Identifier (OID), a sequence of non-negative integers that uniquely describes
the path taken through the hierarchical structure.
2.
Using the modem IP Address, perform a Walk of the MIB to retrieve all the MIB objects
managed in the MM200.
TM086 - Rev. 4.1
User Interfaces
4-51
Advertisement
Table of Contents
Troubleshooting
